Self Lub®-MS
Self lubricating bearing with steel back, intermediate layer is sintered bronze and inner layer is PTFE with lead free. It is best suitable for intermittent, reciprocating and oscillating movement. The microscopic space available between grain structure of sintered material helps to retain lubricant.
APPLICATIONS
Shock absorber, Belt tensioner, Automotive clutch, Pully dampers and Pneumatic equipment etc
Bearing Properties
| Bearing Properties | Unit | Value |
|---|---|---|
| Maximum Load Capacity(Static) | 250 | N/mm² |
| Maximum Load Capacity(Dynamic) | 140 | N/mm² |
| Maximum Sliding Speed(Dry) | 2.5 | m/s |
| Maximum Sliding Speed(Oil Lubrication) | 5 | m/s |
| Maximum PV Value(Dry Continuous Opration) | 1.8 | N/mm².m/s |
| Maximum PV Value(Dry Short Period Opration) | 3.6 | N/mm².m/s |
| Coeficient Of Fraction(Dry) | 0.08 - 0.25 | |
| Coeficient Of Fraction(Oil Lubrication) | 0.02-0.12 | |
| Working Temerature(Max) | +280 | °C |
| Working Temerature(Min) | -200 | °C |
| Shaft finish RA(Recommended) | 0.4 Ra | µm |
Operating Conditions
| DRY | OIL | GREASE | WATER | PROCESS_FLUID | Very good | Very good | Fair | Fair | Fair |
|---|