Pre Lub®-PJ 60
Bronze alloy base bearing has holes punched across the working surface for effective lubrication. It has high loading capacity, good wear resistance and low coefficient of friction.
FEATURES
PJ60 is deriving from PJ30, the difference between PJ30 & PJ60 is Indentations on sliding surface, which substituted by Through-holes. Theses holes will allow greater capacity to collect lubricant, which build up a lubrication film at the start of movement and reduce the friction.
APPLICATIONS
Earthmoving equipment, Construction and Agriculture equipment.
Bearing Properties
| Bearing Properties | Unit | Value |
|---|---|---|
| Maximum Load Capacity(Static) | 120 | N/mm² |
| Maximum Load Capacity(Dynamic) | 40 | N/mm² |
| Maximum Sliding Speed(Grease Lubrication) | 2.5 | m/s |
| Maximum PV Value(Grease Lubrication) | 2.8 | N/mm².m/s |
| Coeficient Of Fraction(Grease Lubrication) | 0.08-0.25 | |
| Working Temerature(Max) | +200 | °C |
| Working Temerature(Min) | -100 | °C |
| Shaft finish RA(Recommended) | 0.4 Ra | µm |
Operating Conditions
| DRY | OIL | GREASE | WATER | PROCESS_FLUID | Inadvisable | Good | Good | Inadvisable | Inadvisable |
|---|